Rockdefoam 8040

Rockdefoam 8040

Rockdefoam 8040 is a very efficient defoamer which can be safely used during the manufacture of sugar and potato only.

Appearance: Clear pale yellow liquid
Nature: Modified linear organic esters
Ionity: Anionic
pH (1:10 solution): 7 – 8
Solubility: Dilution with 50% water does not exhibit any gel formation
Density(g/cm3): 1.06 ± 0.2
Solidification: -5°C
Viscosity at 25°C: S3 R50 1600 cp
Activity %: 38 – 40
Moisture: 40 ± 2
Shelf life: Min. 12 months
Solid %: 41 ± 1
Packing: 100 kg

When nitric acid is added to the phosphate rock, the digester has a temperature of about 60°C and the acid strength is 60%. At the evaporation stage the temperature is 180°C. Rockdefoam 8040 has proved to be very powerful defoamer in the manufacture of complex fertilizers produced from the following important rock phosphates:
Kola Phosphate, USSR , Morocco Phosphate, Florida Phosphate, Granges Phosphate, Sweden, Jordanian Phosphate Usually, foam is caused by carbonates in the appetites out of five different rock phosphates mentioned above. Florida phosphate and Morocco phosphate cause great foam problems. Quantities of Rockdefoam 8040 used in these two varieties vary between 0.05 to 0.1% on the weight of rock, i.e. 500 grams to 1 kg of Rockdefoam 8040 for 1 ton of rock is sufficient to suppress foam. However, this quantity may change depending upon conditions during operation. NPK fertilizers was found to be very effective in suppressing foam formed during manufacture of NPK fertilizers.

a) Decomposition of Urea with phosphoric acid
b) Presence of soot in the system.
c) Dissolution of rubber lining which gives rise to gasses
d) Plant conditions
Foaming caused due to various reasons mentioned above can easily be suppressed by dosing 0.005 to 0.05% of Rockdefoam 8040 on the weight of scrubber liquor/fertilizer slurry. Sometimes, higher doses are, required when foaming is very severe. Dosing of Rockdefoam 8040 can be done from overhead tank or with the help of a plunger type of pump.

Rockdefoam 8040 defoamer exhibits the following outstanding characteristics in actual plant usage:
1. Lowers the surface and interfacial tension.
2. Significantly lowers defoamer cost per ton of acid produced.
3. Promote more complete reaction.
4. Does not affect rubber tank and hose lining.
5. Does not discolor or clog filter cloth.
6. Improves filtration and crystallization.